Selected work
Under NDA we can name names. Here is the shape of the work and what mattered about each tool.
Selected work
Under NDA we can name names; here is the shape of the work — the part, the sector, and what mattered about the tool.
Beverage
A thin-wall PP closure for a regional bottler, moulded on a 250-tonne cell at a 4.1-second cycle. A hot-runner valve gate and conformal cooling hold the slip band flat across all sixteen cavities; we run 2.4 million a week to a VMI bin at their filling hall.
Medical devices
A five-part enclosure for a benchtop analyser, moulded in flame-rated ABS in our Class 8 bay. Every shot is weighed, and each set ships with a certificate of conformance; tolerances on the optical mounts are held to ±0.03 mm and verified on the CMM.
Automotive
Glass-filled PA66 connector housings for a Tier-1 wiring supplier, run with brass inserts overmoulded in a vertical cell. Full PPAP, IATF-controlled, with SPC on the critical pin-lead dimension and traceability from resin lot to despatch note.
From the buyers
Aster Automotive Systems
“The tool came in on the date they quoted, and the T1 report matched the drawing line for line. Two years in, the process hasn't drifted — we've stopped incoming-inspecting the part.”
Delta Instruments (M)
“Keystone took our enclosure from a rough STEP file to a validated five-cavity tool without us flying anyone over. The DFM notes alone saved us a mould revision.”
Lumen Electrical
“They run our closures to a VMI bin at our filling hall and we have never held the line for stock. Documentation for the audit was ready the same afternoon we asked.”
Have a part to quote?
A quote covers the tool, the part price at your volume, the lead time and the DFM changes we'd recommend. No obligation, and your files stay under NDA.
